Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 10

Passo 10
Disconnect a linkage between the temperature control mechanism and the steam valve. You can do this by pressing one part with a small  flat-blade screwdriver while supporting the other underneath. Take care as these small plastic parts could easily be broken. A linkage on the other side operated by the automatic steam control simply lifts off.
Removing the plastic base - 1
  • Disconnect a linkage between the temperature control mechanism and the steam valve. You can do this by pressing one part with a small flat-blade screwdriver while supporting the other underneath. Take care as these small plastic parts could easily be broken.

  • A linkage on the other side operated by the automatic steam control simply lifts off.

  • Slide both mechanisms back as far as they will go.

  • Note that on reassembly both mechanisms and the knobs controlling them must all be in their rear-most positions to ensure they re-connect correctly.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.