1989-1994 Toyota Pickup Oil Change (2.4L I4)

Torna alla Guida

Inglese

Italiano

Passo precedente Passo successivo

Traduzione in corso passo 13

Passo 13

1989-1994 Toyota Pickup Oil Change (2.4L I4): passo 0, immagine 1 di 3

1989-1994 Toyota Pickup Oil Change (2.4L I4): passo 0, immagine 2 di 3

1989-1994 Toyota Pickup Oil Change (2.4L I4): passo 0, immagine 3 di 3

Locate the oil dipstick. It has a yellow handle and is just to the right of the oil filler cap.
Pull out the oil dipstick, wipe it off, place it all the way back into its hole and remove it again.
Check the oil level on the end of the dipstick. It should be between the two holes or slightly above the top one.
This is not your actual oil level, but a pre-check to make sure the engine will not run dry when you first start it. The oil level will drop slightly after the first run when oil fills the new oil filter.
Add oil if the oil level is below the bottom hole of the dipstick. Place the oil dipstick all the way back in its hole.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.