Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 6

Passo 6
Once you've aligned the bottom half of the adhesive strip, peel the longer piece of backing out from behind the strip. If the bottom half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.
  • Once you've aligned the bottom half of the adhesive strip, peel the longer piece of backing out from behind the strip.

  • If the bottom half isn't aligned properly, you can carefully peel it up and re-stick it before peeling off the lower backing strip. Be sure to use the spudger tip to anchor the top.

接着ストリップの下側半分の位置を揃えたら、ストリップの裏側から長い方のシールを剥がしてください。

下側半分の装着位置が正しく配置できない場合は、一番下のストリップの裏側シールを剥がす前にもう一度再調整して、装着してください。ストリップの上部にスパッジャーを置いて、突っ張るようにしながら装着していきます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.