Salta al contenuto principale

Sostituzione altoparlante destro iMac Intel 21.5" Display Retina 4K

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 10le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 2

Passo 2
iMac Intel 21.5" Retina 4K Display Right Speaker Replacement: passo 0, immagine 1 di 1
  • Remove the two 10 mm T10 Torx screws securing the right speaker to the rear enclosure.

  • Rubber washers keep the screws snug in the speaker even when loosened. You can use tweezers or a fingernail to remove the screws, or simply leave them with the speaker assembly.

Rimuovi le due viti Torx T10 da 10 mm che fissano l'altoparlante destro al telaio posteriore.

Le rondelle di gomma mantengono le viti ben salde nell'altoparlante anche quando vengono allentate. Puoi usare delle pinzette o un'unghia per rimuovere le viti o lasciale con l'assemblaggio dell'altoparlante.

[* red] Remove the two 10 mm T10 Torx screws securing the right speaker to the rear enclosure.
- [* icon_note] Rubber washers keep the screws snug in the speaker even when loosened. You can use tweezers or a fingernail to remove the screws, or simply leave them with the speaker assembly.
+ [* icon_note] Rubber washers keep the screws snug in the speaker even when loosened. You can use [product|IF145-020|tweezers] or a fingernail to remove the screws, or simply leave them with the speaker assembly.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.