Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 9

Passo 9
Wipe off the previous oil from the engine's oil filter threads, filter seal face, and any parts that were dripped on. Use a clean glove to apply a thin layer of new oil onto the gasket of the new oil filter. Place the filter on the engine's oil filter threads and turn it clockwise by hand until it is snug.
  • Wipe off the previous oil from the engine's oil filter threads, filter seal face, and any parts that were dripped on.

  • Use a clean glove to apply a thin layer of new oil onto the gasket of the new oil filter.

  • Place the filter on the engine's oil filter threads and turn it clockwise by hand until it is snug.

  • Do not over-tighten or you may strip the oil filter threads.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.