Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.
Traduzione in corso passo 3
Passo 3


-
Lift the fan out of the mini for enough clearance to access its connector.
-
Grab all the wires at once and gently pull straight up to disconnect the fan from the logic board.
-
Remove the fan.
[* black] Lift the fan out of the mini for enough clearance to access its connector. |
[* black] [* icon_caution] Do '''not''' pry at the socket, or you may rip it from the logic board. |
[* black] [* icon_caution] Do '''not''' pry at the socket, or you may rip it from the logic board. |
[* black] Remove the fan. |
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.