Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 4le guide che includono questo passo.
Traduzione in corso passo 3
Passo 3
-
The antenna loop board needs to be pried up (it is glued down). Gently use a plastic opening tool or spudger, to dislodge the antenna loop board. The board is connected to the antenna electronics by a small ribbon cable. This two-board assembly is very frail.
-
The two small antenna circuit boards can now be lifted up together, and their orange cable can be peeled from the display.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.