Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 8

Passo 8
To avoid damaging its socket, do not lift the end of the SSD excessively. Pull the drive straight out of its socket and remove it from the logic board.
  • To avoid damaging its socket, do not lift the end of the SSD excessively.

  • Pull the drive straight out of its socket and remove it from the logic board.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

Um Schäden am Anschluss zu vermeiden, hebe das Ende der SSD nicht zu stark an.

Ziehe das Laufwerk gerade aus seinem Anschluss heraus und entferne es vom Logic Board.

Wenn du die SSD wieder einsetzt, gehe sicher, dass sie richtig positioniert ist, bevor du die Schraube wieder eindrehst.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.