Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Torna alla Guida
Inglese
Giapponese
Passaggio precedente Passo successivo

Traduzione in corso passo 13

Passo 13
When the draining oil slows to a drip, wipe off the area around the drain plug and reinstall it by first tightening it by hand. Finish tightening the drain plug with a 19 mm box end wrench or socket wrench.

  • When the draining oil slows to a drip, wipe off the area around the drain plug and reinstall it by first tightening it by hand.

  • Finish tightening the drain plug with a 19 mm box end wrench or socket wrench.

  • Only tighten the drain plug until it is snug. Over-tightening the oil drain plug can strip or crack the oil pan—a very costly error. You can always tighten the drain plug more later.

  • If using a torque wrench to tighten the drain plug, set the torque to : 29-41 N-m; 22-30 ft-lbs

  • Wipe off the area around the drain plug one more time with a rag or towel.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.