Salta al contenuto principale
Inglese
Tedesco

Traduzione in corso passo 7

Passo 7
Two screws hold the valve looking upwards. As the old one uses M4 screws you have to cut the thread into the plastic body. Use a threader. and  make a circle  cut into the plastic of the holder of the boiler  in order to let the incoming hose pass by.
Changing 2
  • Two screws hold the valve looking upwards.

  • As the old one uses M4 screws you have to cut the thread into the plastic body. Use a threader.

  • and make a circle cut into the plastic of the holder of the boiler in order to let the incoming hose pass by.

Zwei Schrauben halten das Ventil von unten, drehe sie heraus.

Im Metall war ein M4-Gewinde, dieses muss in den Kunststoff geschnitten werden. Benutze einen Gewindeschneider.

und feile eine kleine Einbuchtung in den Boilerhalter, damit der Eingangsschlauch vorbeilaufen kann.

[title] Changing 2 - Austausch 2
[* blackgreen] Two screws hold the valve looking upwards.
[* blue] Zwei Schrauben halten das Ventil von unten.
[title] Changing 2 - Austausch 2
[* blackgreen] Two screws hold the valve looking upwards.
[* blue] Zwei Schrauben halten das Ventil von unten.
[* black] As the old one uses M4 screws you have to cut the thread into the plastic body. Use a threader.
[* blue] Im Metall war ein M4-Gewinde, dieses muss in den Kunststoff geschnitten werden. Benutze einen Gewindeschneider.
[* black] and make a circle cut into the plastic of the holder of the boiler in order to let the incoming hose pass by.
[* blue] und eine kleine Einbuchtung in den Boilerhalter feilen, damit der Eingangsschlauch vorbeigeht.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.