Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Francese

Traduzione in corso passo 2

Passo 2
Using a 5/32 Hex or Allen screwdriver, unscrew the two screws from the primary chain inspection cover. Your inspection cover may not be round, depending on the year. However, it will be in the same location and secured by similar screws. Remove the primary chain inspection cover from the transmission housing.
Removing the Primary Chain Inspection Cover
  • Using a 5/32 Hex or Allen screwdriver, unscrew the two screws from the primary chain inspection cover.

  • Your inspection cover may not be round, depending on the year. However, it will be in the same location and secured by similar screws.

  • Remove the primary chain inspection cover from the transmission housing.

À l'aide d'un tournevis Hex 5/32 ou Allen, dévissez les deux vis du capot d'inspection de la chaîne primaire.

Selon l'année, votre couvercle d'inspection peut ne pas être rond. Cependant, il sera au même endroit et sécurisé par des vis similaires.

Retirez le capot d'inspection de la chaîne primaire du boîtier de transmission.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.