Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Now you can remove and manipulate the circuit board.  There is one last wire attaching it to the other board, but it is difficult and unnecessary to remove. Locate any capacitors that are blown.  The tops will be rounded rather than flat or could have dried orange fluid spilling from the tops.  These need to be replaced.  Identify their capacitance and voltage and remember these. Using a soldering iron and desoldering tape, remove the solder attaching any blown capacitors.
Removing the capacitors
  • Now you can remove and manipulate the circuit board. There is one last wire attaching it to the other board, but it is difficult and unnecessary to remove.

  • Locate any capacitors that are blown. The tops will be rounded rather than flat or could have dried orange fluid spilling from the tops. These need to be replaced. Identify their capacitance and voltage and remember these.

  • Using a soldering iron and desoldering tape, remove the solder attaching any blown capacitors.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.