Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
Now we need to start detaching the electronics from the screen.  The first step for this is to remove the plates protecting the wires.  There are a total of 5 screws holding two plates onto the top and bottom. With the plates removed, we can now unplug the 2 green and 2 pink wires connecting the electronics to the screen.  This is best done with needle nose pliers, since the attaching head must be depressed and pulled at the same time. With the plates removed, we can now unplug the 2 green and 2 pink wires connecting the electronics to the screen.  This is best done with needle nose pliers, since the attaching head must be depressed and pulled at the same time.
  • Now we need to start detaching the electronics from the screen. The first step for this is to remove the plates protecting the wires. There are a total of 5 screws holding two plates onto the top and bottom.

  • With the plates removed, we can now unplug the 2 green and 2 pink wires connecting the electronics to the screen. This is best done with needle nose pliers, since the attaching head must be depressed and pulled at the same time.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.