Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Flip the monitor around now and locate the two slots on the edges.  These slots would be below the screen where the faceplate is attached. Use a flat tool (such as a flathead screwdriver) to pop the front frame off.  It is attached via plastic snaplocks and will come off with some prying. Once the faceplate is removed, the monitor can then be removed from the housing, leaving just the monitor and the faceplate attached with a ribbon wire.  The wire can now be pulled from the slot, fully removing the faceplate from the monitor.
  • Flip the monitor around now and locate the two slots on the edges. These slots would be below the screen where the faceplate is attached.

  • Use a flat tool (such as a flathead screwdriver) to pop the front frame off. It is attached via plastic snaplocks and will come off with some prying.

  • Once the faceplate is removed, the monitor can then be removed from the housing, leaving just the monitor and the faceplate attached with a ribbon wire. The wire can now be pulled from the slot, fully removing the faceplate from the monitor.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.