Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 35

Passo 35
Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals. These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.
  • Use a spudger to pry the metal rings on the battery terminals up so that they perpendicular to the battery terminals.

  • These rings should be on the same end as the surface mount leads. If they are on opposite ends, the board is on backwards, and you'll need to unscrew the nuts, rotate the circuit board 180°, reinstall the nuts, and tighten the two screws.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.