Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 25

Passo 25
Solder the two speaker leads to the circuit board. Even though the leads aren't excessively long, you'll need to trim them after soldering. Even though the leads aren't excessively long, you'll need to trim them after soldering.
  • Solder the two speaker leads to the circuit board.

  • Even though the leads aren't excessively long, you'll need to trim them after soldering.

Salda le due gambe dello speaker alla scheda logica.

Anche se le gambe non sono molto lunghe, dovrai tagliarle dopo averle saldate.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.