Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later). Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor. Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.
  • We'll start with resistor R1 in your kit, which has yellow, purple, brown, and gold rings on it (more on what these colored rings mean later).

  • Bend the leads of the resistor to 90o angles about 1.5 mm away from the body of the resistor.

Inizieremo con i resistori R1 nel tuo kit che hanno delle bande giallo, viola, marrone e oro (vedremo dopo il significato di queste bande).

Piega le gambe dei resistori a 90° a circa 1,5 mm dal corpo del resistore.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.