Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Pry up the rear panel by pulling the dental pick clockwise in a quick motion. Apply force perpendicular to the plane of the display assembly. You may be afraid to go fast, but going slowly is more likely to bend the case.
  • Pry up the rear panel by pulling the dental pick clockwise in a quick motion. Apply force perpendicular to the plane of the display assembly. You may be afraid to go fast, but going slowly is more likely to bend the case.

  • The rear panel is still attached to the iPhone by the headphone jack cable, so don't entirely remove the rear panel from the iPhone just yet.

楊枝を時計回りにすばやく引いて、リアパネルをこじ開けます。 ディスプレイアセンブリに垂直な力を加えます。作業を速く進めるため不安になるかもしれませんが、ゆっくり作業を進めると、ケースが湾曲する可能性が高くなります。

リアパネルはまだヘッドフォンジャックケーブルでiPhoneに接続されているので、まだiPhoneからリアパネルを完全に取り外さないでください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.