Aggiusta le tue cose Community Store

Microsoft Surface Pro 4 Vervanging van het koellichaam

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Torna alla Guida
Inglese
Olandese
Passo precedente Passo successivo

Traduzione in corso passo 3

Passo 3
Microsoft Surface Pro 4 Heat Sink Replacement, Unscrew the heat sink: passo 0, immagine 1 di 1
Unscrew the heat sink

  • Use a T3 Torx screwdriver to remove two screws from the heat sink:

  • One 2.4 mm screw along the top of the rectangular plate covering the battery.

  • Make sure you don't lose this bracket, as it might separate from the heatsink.

  • One 2.2 mm screw along the bottom of the rectangular plate covering the battery

Schroef het koellichaam los

Gebruik een T3 Torx-schroevendraaier om de twee schroeven uit het koellichaam te verwijderen.

Eén 2.4 mm lange schroef aan de bovenkant van de rechthoekige plaat die de batterij bedekt.

Eén 2.2 mm lange schroef langs de onderkant van de rechthoekige plaat die de batterij bedekt.

[title] Unscrew the heat sink
[* black] Use a T3 Torx screwdriver to remove two screws from the heat sink:
- [* red] One 2.4 mm screw along the top of the rectangular plate covering the battery
+ [* red] One 2.4 mm screw along the top of the rectangular plate covering the battery.
+ [* icon_note] Make sure you don't lose this bracket, as it might separate from the heatsink.
[* orange] One 2.2 mm screw along the bottom of the rectangular plate covering the battery

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.