Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 4

Passo 4
After removing the Phillips head screw,  you will need to remove a black wire. Use a spudger to unclip the cable first. It might be helpful to bend the cable out of the way when working on the phone. Pull back on the ribbon-cable as shown in the image. This is connected to both the charging port and the vibration module (which is similar to a small watch battery).
  • After removing the Phillips head screw, you will need to remove a black wire. Use a spudger to unclip the cable first.

  • It might be helpful to bend the cable out of the way when working on the phone.

  • Pull back on the ribbon-cable as shown in the image. This is connected to both the charging port and the vibration module (which is similar to a small watch battery).

  • Gently pry the vibration module out with a plastic opening tool. Be gentle, for it is adhered to the phone.

  • You will need to remove the vibration module before the charging port.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.