Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 3

Passo 3
Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation. Slowly pull the upper display assembly away from the upper case. Make sure that the various ribbon cables are being fed through the slit in the upper case.
  • Before proceeding, note how the 3 ribbon cables are oriented (what direction the gold contacts face) and layered together (which cable is on top of which). The cables are too short to reach if they are threaded through in any other orientation.

  • Slowly pull the upper display assembly away from the upper case.

  • Make sure that the various ribbon cables are being fed through the slit in the upper case.

  • Separate the upper display assembly from the upper case.

Merke dir gut die Orientierung der drei Flachbandkabel, bevor du weitermachst (wohin die Goldkontakte zeigen), und in welcher Reihenfolge sie übereinander geschichtet sind. Die Kabel sind zu kurz, um Kontakt herzustellen, wenn sie in anderer Weise geführt werden.

Ziehe langsam die obere Displayeinheit vom oberen Gehäuse weg.

Achte darauf, dass die verschiedenen Flachbandkabel durch den Schlitz im oberen Gehäuse geführt werden.

Trenne die obere Displayeinheit vom oberen Gehäuse.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.