Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 2

Passo 2
Once the metal cover is removed, locate the battery connector wire, which clips into the motherboard. Using a plastic spudger, gently pry on the clip to release it.
  • Once the metal cover is removed, locate the battery connector wire, which clips into the motherboard.

  • Using a plastic spudger, gently pry on the clip to release it.

  • This will cut power to the phone, and prevent any power running to any of the components which is important while working on the phone.

Wenn du die Abdeckung abgenommen hast kannst du den Verbinder des Akkukabels auf der Hauptplatine sehen.

Löse den Verbinder vorsichtig mit einem Spudger.

Dadurch wird die Stromversorgung abgetrennt. Das ist wichtig, damit kein Bauteil während der Reparatur unter Spannung steht.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.