iPod 5th Generation (Video) Headphone Jack & Hold Switch Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese

Italiano

Traduzione in corso passo 5

Passo 5

If your replacement headphone jack includes the white plastic hold switch, simply reinstall the headphone jack. If your replacement part does not include the plastic hold switch, follow the next steps to transfer the plastic hold switch to your new headphone jack.
If you're just trying to remove the rear panel, you can skip Steps 15 and 16.
Remove the single Phillips screw nearest to the hold switch. Note: You may find adhesive holding the back of the screw in place.
Lift the plastic portion of the Hold switch away from the orange ribbon cable.
Ensure that the black notch lines up with the gray slider during reassembly of the switch (see picture 2).

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.