Salta al contenuto principale

Sostituzione della scocca su un iPod di 5a generazione (video)

Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte 13le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 5

Passo 5
iPod 5th Generation (Video) Case Replacement: passo 0, immagine 1 di 2 iPod 5th Generation (Video) Case Replacement: passo 0, immagine 2 di 2
  • Gently glide the iPod opening tool on the top of the display, making sure to free the retaining clips.

  • The other sides of the iPod should now easily come loose. If they do not, use iPod opening tools on the right side of the iPod in the same way as on the left side of the iPod.

  • Separate the front of the iPod from the back about an inch (or a couple of centimeters).

  • The iPod casing is now open, but don't completely separate the two halves just yet. Two ribbon cables are still connecting the back panel to the rest of the iPod.

Fai scorrere delicatamente lo strumento per l'apertura dell'iPod lungo il bordo superiore, assicurandoti di liberare i ganci.

Gli altri bordi dell'iPod dovrebbero liberarsi facilmente ora. Se non lo fanno, usa lo strumento lungo il lato destro dell'iPod come fatto per il lato sinistro.

Allontana il fronte dell'iPod dal retro di circa 2 centimetri.

La copertura dell'iPod è ora aperta, ma non separare ancora del tutto le due metà. Due cavi a nastro collegano il pannello posteriore al resto del dispositivo.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.