Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 4

Passo 4
Remove the battery.
  • Remove the battery.

  • Do not reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

  • Before installing a new battery remove any remaining adhesive from the phone, and clean the glued areas with isopropyl alcohol and a lint-free cloth.

  • Secure the new battery with pre-cut adhesive or double-sided adhesive tape. In order to position it correctly, apply the new adhesive into the phone at the places where the old adhesive was located, not directly onto the battery. Press the new battery firmly into place for 5-10 seconds.

Entferne den Akku.

Verwende den Akku nach dem Entfernen nicht wieder, da dies ein potenzielles Sicherheitsrisiko darstellt. Ersetze den Akku durch einen neuen.

Entfernen vor dem Einsetzen eines neuen Akkus den verbleibenden Klebstoff vom Smartphone und reinige die geklebten Stellen mit Isopropylalkohol und einem fusselfreien Tuch.

Verklebe den neuen Akku mit vorgestanzter Klebefolie oder doppelseitigem Klebeband. Um den Akku richtig zu positionieren, platziere den neuen Klebstoff an den Stellen im Smartphone an denen sich der alte Kleber befand. Drücke den neuen Akku 5-10 Sekunden lang fest.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.