Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Put on heat-resistant gloves and place the phone on a surface that will not catch fire or melt. Using a heat gun, apply  slow and even heat to the edges of the back panel. DO NOT stay on one spot for too long, the heat gun can damage the phone if the heat is applied to the same area for a long period of time.
  • Put on heat-resistant gloves and place the phone on a surface that will not catch fire or melt.

  • Using a heat gun, apply slow and even heat to the edges of the back panel.

  • DO NOT stay on one spot for too long, the heat gun can damage the phone if the heat is applied to the same area for a long period of time.

  • While heating the back panel, use a Jimmy to test if the adhesive is soft enough to allow the panel to separate from the device.

  • Carefully detach the back panel, using opening picks to hold the panel apart from the device.

  • Once most of the edges are separated from the device, attach a suction cup to the back panel.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.