Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Tedesco

Traduzione in corso passo 2

Passo 2
Lift the LED driver board out of its recess in the outer case, minding the DC-In cable still attaching it to the power supply.
  • Lift the LED driver board out of its recess in the outer case, minding the DC-In cable still attaching it to the power supply.

  • Disconnect the DC-In cable by depressing the locking mechanism while pulling the connector away from its socket on the LED driver board.

Hebe die LED Treiberplatine aus ihrer Vertiefung im äußeren Gehäuse heraus. Denke dabei daran, dass sie mit dem Gleichstromversorgungskabel immer noch am Netzteil angeschlossen ist.

Löse das Gleichstromversorgungskabel, indem du auf den Verschlussmechanismus drückst und gleichzeitig den Stecker aus seinem Anschluss auf der LED Treiberplatine herausziehst.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.