Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 2

Passo 2
Carefully lift the CPU straight up off its socket. Be sure your new CPU is properly aligned and seated before clamping it back down. The small gold arrow on the CPU should align with the white arrow printed on the logic board near the CPU socket as seen in the second picture.
  • Carefully lift the CPU straight up off its socket.

  • Be sure your new CPU is properly aligned and seated before clamping it back down. The small gold arrow on the CPU should align with the white arrow printed on the logic board near the CPU socket as seen in the second picture.

  • Make sure to apply a new layer of thermal paste before reattaching the heat sink. Our thermal paste guide makes it easy.

CPUをソケットからまっすぐ持ち上げて外します。

新しい交換用のCPUを装着する前に、正しい位置に固定されているか確認してください。2番目の画像を参照しながら、CPUソケット上のゴールドの小さい矢印のプリントが、ロジックボード上の白色の矢印のプリントに合わさります。

ヒートシンクを再度取り付ける前に、新しい放熱グリスを塗布してください。 この放熱グリスの塗布方法を参照してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.