Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Use the flat end of a spudger to pry all three AirPort antenna cable connectors up from their sockets on the AirPort card. During reinstallation, connect the cable with no stripes to the socket marked CH0, the cable with one stripe to CH1, and the cable with two stripes to CH2.
  • Use the flat end of a spudger to pry all three AirPort antenna cable connectors up from their sockets on the AirPort card.

  • During reinstallation, connect the cable with no stripes to the socket marked CH0, the cable with one stripe to CH1, and the cable with two stripes to CH2.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.