Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Cinese

Traduzione in corso passo 1

Passo 1
Begin by using a heat gun or the iOpener (This will take longer.) to melt the adhesive all around the outer edge of the screen. Avoid holding the heat gun too close to the Microsoft Surface 2 so as to not cause any unwanted warping. Avoid touching the metal end of the gun. It will be very hot and can burn you.
  • Begin by using a heat gun or the iOpener (This will take longer.) to melt the adhesive all around the outer edge of the screen.

  • Avoid holding the heat gun too close to the Microsoft Surface 2 so as to not cause any unwanted warping.

  • Avoid touching the metal end of the gun. It will be very hot and can burn you.

  • Insert the opening picks just under the screen and black edging. Be sure to place them evenly on each side.

  • Using the gap created by the picks, slowly pry the screen from the body of the Microsoft Surface 2 with a plastic opening tool. Pry as uniformly as possible.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.