How to reduce ChiliCube noise level by replacing fans

Inglese

Italiano

Traduzione in corso passo 7

Passo 7

Fan bracket/shroud removal

These instructions are written as if you were only replacing one fan, but you may want to do these steps to both fans at the same time.
The 2 screws supporting the fan are on the heat sink side of the bracket/shroud, so we remove the bracket first, so we can get to those screws next.
Remove four screws holding the bracket/shroud to the heat sink.
Tilt the bracket/shroud out. It may take a little more force than you would like. Thats OK. Try sliding it side-to-side as well.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.