Aggiusta le tue cose Community Store

How to reduce ChiliCube noise level by replacing fans

Torna alla Guida
Inglese
Italiano
Passo precedente Passo successivo

Traduzione in corso passo 3

Passo 3
How to reduce ChiliCube noise level by replacing fans, Flip and Remove screws holding case together: passo 0, immagine 1 di 3 How to reduce ChiliCube noise level by replacing fans, Flip and Remove screws holding case together: passo 0, immagine 2 di 3 How to reduce ChiliCube noise level by replacing fans, Flip and Remove screws holding case together: passo 0, immagine 3 di 3
Flip and Remove screws holding case together

  • Flip unit over.

  • Slide razor blade under the QC sticker, it hides one of the screw holes. You should park it on top of one of the labels for future use. That is if you wish to pretend you have not opened a device you own.

  • Remove 10 screws. Four of them are in deep narrow holes which presumably are intended to prevent casual repair like this. You will find most regular #2 philip's screwdrivers are not long and/or narrow enough.

  • The hole the red arrow is pointing to, is not a screw hole.

  • The #2 Philips screwdriver must have a shank at least 8" long. If you have an insulated electrician's driver which might be long enough, it is probably too wide for the hole.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.