Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Release the black ribbon clamp using an iPod opening tool to lift it. Remove the ribbon connecting the circuit board from the body of the camera using tweezers. The SD card reader is attached to the back of the circuit board. The circuit board and SD card combination should be replaced.
  • Release the black ribbon clamp using an iPod opening tool to lift it.

  • Remove the ribbon connecting the circuit board from the body of the camera using tweezers.

  • The SD card reader is attached to the back of the circuit board. The circuit board and SD card combination should be replaced.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.