Salta al contenuto principale

Fix Your Stuff

Right to Repair

Parts & Tools

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Remove all four T3 Torx screws. Then "pop" out the electronics by pressing in the reset hole and pushing out the side with a pin.  Use your thumb and push it up towards the wrist band clip (top in this picture).  The unit "slides" up and out.
Removing the guts
  • Remove all four T3 Torx screws. Then "pop" out the electronics by pressing in the reset hole and pushing out the side with a pin. Use your thumb and push it up towards the wrist band clip (top in this picture). The unit "slides" up and out.

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.