Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Place the new scanner head in the scanner tray by fastening the drive belt into the black tab. Make sure the tab on the outer portion of the gray drive belt is fastened.
Adding New Scanner Head
  • Place the new scanner head in the scanner tray by fastening the drive belt into the black tab.

  • Make sure the tab on the outer portion of the gray drive belt is fastened.

  • Once the drive belt is secured, rotate the scanner head back into position.

  • Re-attach the white ribbon wire to the connection from Step 10.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.