Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Giapponese

Traduzione in corso passo 7

Passo 7
Use the small iPod opening tool to carefully peel the orange ribbon cable and attached black Hold switch up from the metal backing.
  • Use the small iPod opening tool to carefully peel the orange ribbon cable and attached black Hold switch up from the metal backing.

  • When re-attaching the replacement Hold switch, make sure the two small posts on the back of the switch are aligned with the two holes in the metal backing.

小型のiPod用オープニングツールを使って、オレンジ色のリボンケーブルと付属の黒いHoldスイッチを金属製の裏蓋から慎重に剥がします。

交換用のHoldスイッチを取り付ける際には、スイッチの背面にある2つの小さなポストが、メタル製の裏地にある2つの穴と合致していることを確認してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.