Salta al contenuto principale
Inglese
Cinese

Traduzione in corso passo 3

Step 3
Lift the end of the AirPort board up enough to pass over the heat sink directly behind it. Do not lift the AirPort board too high, or you could damage the contacts or socket. Pull the AirPort board straight out of its socket on the logic board.
  • Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.

  • Do not lift the AirPort board too high, or you could damage the contacts or socket.

  • Pull the AirPort board straight out of its socket on the logic board.

  • There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board, or transfer it to your replacement board.

将网卡的末端抬起足够高度,以便越过它正后方的散热铁。

不要把网卡抬得太高,否则你有可能伤到插头或是插槽。

将网卡从它在主板上的插槽中笔直地拉出来。

在网卡的下面会有一些散热膏。在你要把网卡重新装回去,或是装到别的主板上的时候别忘了再涂上散热膏。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.