Skip to main content
Inglese
Giapponese

Traduzione in corso passo 3

Step 3
Lift the end of the AirPort board up enough to pass over the heat sink directly behind it. Do not lift the AirPort board too high, or you could damage the contacts or socket. Pull the AirPort board straight out of its socket on the logic board.
  • Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.

  • Do not lift the AirPort board too high, or you could damage the contacts or socket.

  • Pull the AirPort board straight out of its socket on the logic board.

  • There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board, or transfer it to your replacement board.

AirPort ボードの端を持ち上げて、後ろにあるヒートシンクに十分なスペースを作ります。

AirPort ボードを高く持ち上げ過ぎないようご注意ください。コンタクト部分、またはソケットにダメージを与えてしまうことがあります。

ロジックボードにあるソケットからAirPort ボードをまっすぐ引き出します。

AirPort ボードの裏には粘着性放熱パッドがついています。再組立や交換する際は、この放熱パットを新しい交換用ボード上に必ず移してください。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.