Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 3

Passo 3
Lift the end of the AirPort board up enough to pass over the heat sink directly behind it. Do not lift the AirPort board too high, or you could damage the contacts or socket. Pull the AirPort board straight out of its socket on the logic board.
  • Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.

  • Do not lift the AirPort board too high, or you could damage the contacts or socket.

  • Pull the AirPort board straight out of its socket on the logic board.

  • There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board, or transfer it to your replacement board.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.