Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 10

Passo 10
It's finally time to remove the motherboard! We'll start by releasing the I/O port bracket on the back of the computer. This bracket is under pressure and will fly across the room if it isn't held down. (That may be why it's called a "Flying Serial".)
  • It's finally time to remove the motherboard!

  • We'll start by releasing the I/O port bracket on the back of the computer.

  • This bracket is under pressure and will fly across the room if it isn't held down. (That may be why it's called a "Flying Serial".)

  • Six support pegs are now the only thing holding the motherboard in place.

  • Slide the board towards the back of the computer and lift up once the pegs are free.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.