Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
The next step is to remove the power supply. Disconnect the 14 pin ATX connector from the motherboard. (Look for the festively colored cable.) A single T5 Torx screw holds the power supply to the chassis.
  • The next step is to remove the power supply.

  • Disconnect the 14 pin ATX connector from the motherboard. (Look for the festively colored cable.)

  • A single T5 Torx screw holds the power supply to the chassis.

  • A standard flathead screwdriver can also be used to remove this screw.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.