Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Use a 2.5mm hex key to remove the two screws holding the handle on and remove the handle. You may need to wiggle it a bit to remove it. There will be a metal shaft that you can also pull free. Besides the kink in it to clear the screws, the shaft should h=not be otherwise bent. If it is, then straighten it. There will be a metal shaft that you can also pull free. Besides the kink in it to clear the screws, the shaft should h=not be otherwise bent. If it is, then straighten it.
Remove the handle
  • Use a 2.5mm hex key to remove the two screws holding the handle on and remove the handle. You may need to wiggle it a bit to remove it.

  • There will be a metal shaft that you can also pull free. Besides the kink in it to clear the screws, the shaft should h=not be otherwise bent. If it is, then straighten it.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.