Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Tedesco

Traduzione in corso passo 5

Passo 5
Make sure the battery is disconnected before you disconnect or reconnect the cable in this step. Disconnect the display cable by prying it straight up from its socket on the logic board.
  • Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.

  • Disconnect the display cable by prying it straight up from its socket on the logic board.

Löse mit dem flachen Ende eines Spudgers oder einem Fingernagel den Stecker des Displaydatenkabels von seinem Anschluss vom Logic Board, indem du es gerade nach oben hebelst.

[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.
[* black] Use the flat end of a spudger, or a fingernail, toicon_caution] Make sure the battery is disconnected before you disconnect or reconnect the cable in this step.
[* black] Disconnect
the display data cable by prying it straight up from its socket on the logic board.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.