Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 16

Passo 16
Use generous amounts of heat in a cyclical manner to evenly heat the front glass. Using a SlyPry, slowly work the front glass out of the front plastic frame, while continually applying heat to the area being worked. The adhesive is very thick around the outside of the glass and will take a long time and lots of heat to  get it loose.
Removing the digitizer (front glass)
  • Use generous amounts of heat in a cyclical manner to evenly heat the front glass.

  • Using a SlyPry, slowly work the front glass out of the front plastic frame, while continually applying heat to the area being worked.

  • The adhesive is very thick around the outside of the glass and will take a long time and lots of heat to get it loose.

  • As you work around the edges, place guitar picks or iFixit triangle tools between the glass and the plastic frame.

  • Once all of the adhesive is released separate slowly and notice the cable.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.