Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Heat the tape covering the digitizer connector then remove the tape with tweezers and set aside. Use an opening tool to lift the lever of the connector to release the cable from the connector. Use an opening tool to lift the lever of the connector to release the cable from the connector.
Digitizer conector and cable assembly
  • Heat the tape covering the digitizer connector then remove the tape with tweezers and set aside.

  • Use an opening tool to lift the lever of the connector to release the cable from the connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.