Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 7

Passo 7
Apply a little heat from a 200 degree heat gun to loosen the adhesive on the tape covering the LCD connector. Peel up the tape with tweezers. Fold it back on itself to get it out of the way. Using an opening tool lift the release lever of the LCD connector.
LCD connector and cable
  • Apply a little heat from a 200 degree heat gun to loosen the adhesive on the tape covering the LCD connector.

  • Peel up the tape with tweezers. Fold it back on itself to get it out of the way.

  • Using an opening tool lift the release lever of the LCD connector.

  • Using tweezers put the LCD cable out of the LCD connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.