Canon EOS Digital Rebel (300D) Back Casing Replacement

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese

Italiano

Traduzione in corso passo 9

Passo 9

Remove flat cable linking the camera's body to the back casing

Locate the connector which holds the flat cable to the main circuit board. Unlock the connector by gently pulling up its black piece from the side the flat cable comes into it.
Pull the flat cable from the connector and you'll have completely removed the back casing from the camera.
Note I taped each of the screws to their original places on the removed back casing, so I don't loose or mix any of them.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.