Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Torna alla Guida
Inglese
Italiano
Passaggio precedente

Traduzione in corso passo 10

Passo 10
Remove the Lightning connector assembly. If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part. Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.

  • Remove the Lightning connector assembly.

  • If your replacement part did not come with a headphone jack gasket, use tweezers to remove the gasket from the old part and transfer it to the replacement part.

  • Before re-installation, use a spudger to scour any remaining adhesive residue from the rear case. You can use high concentration isopropyl alcohol to help with the process.

Usa l'estremità a punta di uno spudger per far saltare via il jack cuffie dal suo alloggiamento nel case posteriore.

[* black] UseRemove the pointed tip ofLightning connector assembly.
[* icon_note] If your replacement part did not come with a spudger[https://d3nevzfk7ii3be.cloudfront.net/igi/XBrYVHBxXx3UmHMn|headphone jack gasket|new_window=true], use tweezers to nudgeremove the 3.5 mm headphone jackgasket from the old part and transfer it to the replacement part.
[* icon_reminder] Before re-installation, use a spudger to scour any remaining adhesive residue from its housing in the rear case. You can use high concentration isopropyl alcohol to help with the process.
[* black] UseRemove the pointed tip ofLightning connector assembly.
[* icon_note] If your replacement part did not come with a spudger[https://d3nevzfk7ii3be.cloudfront.net/igi/XBrYVHBxXx3UmHMn|headphone jack gasket|new_window=true], use tweezers to nudgeremove the 3.5 mm headphone jackgasket from the old part and transfer it to the replacement part.
[* icon_reminder] Before re-installation, use a spudger to scour any remaining adhesive residue from its housing in the rear case. You can use high concentration isopropyl alcohol to help with the process.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.