Salta al contenuto principale

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto su tutte le guide che includono questo passo.

Inglese
Italiano

Traduzione in corso passo 1

Passo 1
Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury. Place the Cinema Display so that it is lying on its face and the feet are pointed away from you. Locate the three screws that connect the back foot to the hinge. Remove the three screws (9.52 x 4.43mm) using the Hex Key.
  • Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.

  • Place the Cinema Display so that it is lying on its face and the feet are pointed away from you.

  • Locate the three screws that connect the back foot to the hinge. Remove the three screws (9.52 x 4.43mm) using the Hex Key.

  • Remove the back foot from the hinge mount by grabbing the foot and pulling upwards.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.