Aggiusta le tue cose Community Store

iPad 2 Wi-Fi EMC 2415のバッテリーの交換

Avviso: Stai modificando una guida prerequisita. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Torna alla Guida
Inglese
Giapponese
Passo successivo

Traduzione in corso passo 1

Passo 1
iPad 2 Wi-Fi EMC 2415 Battery Replacement: passo 0, immagine 1 di 3 iPad 2 Wi-Fi EMC 2415 Battery Replacement: passo 0, immagine 2 di 3 iPad 2 Wi-Fi EMC 2415 Battery Replacement: passo 0, immagine 3 di 3

  • Reheat the iOpener in the microwave for one minute.

  • Remember to be careful not to overheat the iOpener during the repair procedure. Wait at least two minutes before reheating the iOpener, and never microwave it for more than one minute.

  • Place the heated iOpener on the back of the iPad just right of center (the side opposite the rear facing camera). Let it sit there for 90 seconds to soften the battery adhesive.

  • Move the iOpener to the center of the back of the iPad and let the iOpener sit for another 90 seconds.

  • If the iOpener cools significantly between sittings, reheat it for another minute.

  • Move the iOpener to the left edge (the side with the rear facing camera) of the back of the iPad and let the iOpener sit for another 90 seconds.

iOpenerを電子レンジで約1分間温めます。

作業中、iOpenerを過熱しすぎないように注意してください。 前の加熱より2分以上間を開けてください。そして1分以上、電子レンジで加熱しないでください。

温めたiOpenerをiPadの背面中央(背面向きカメラの反対側)に置きます。 90秒間載せて、バッテリーの接着剤を柔らかくします。

iOpenerをiPad背面中央に移して、iOpenerを90秒間載せます。

この間、iOpenerが急激に冷えてきた場合、さらに電子レンジで1分間加熱します。

iOpenerをiPadの背面の左端（背面向きカメラ側）に移動させ、iOpenerをさらに90秒間載せます。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.